The model WC5WA4020H
abrasive cutting system:
420Mpa (60,000 psi), 2000x4000mm ( 6'x13')
Cut all kinds of metal, marble, granite, glass, tile, plastic, rubber, and almost
all materials.
The
high pressure pump: Full abrasive waterjet cutting system consists of high
pressure pump, cutting table with hopper, and CNC controller.
Pump
type
|
dual plunger reciprocal intensifier
|
Maximum pressure
|
400Mpa
(55kpsi)
|
Pump cooling method
|
forced
water flow, electrical chiller is optional.
|
Max
water flow rate
|
0.8Gal/min (3.4L/min).
|
Water Filter
|
2-stage water
filtration included.
|
Minimum supply water pressure
to pump
|
70psi (5kg/cm2)
|
Approximate size
|
60" x 36"x 55"(1600 x900 x1400mm), weight 1100kg
|
Power source
|
3 phase,
380VAC, 50Hz (or 220V 60Hz),220VAC or 60Hz (380VAC, 50Hz)
|
Attenuator
|
0.35Gal (1.4 Liters)
|
Cooling method
|
forced water. Or oil chiller as an option
|
Hydraulic fluid tank capacity:
|
42Gal (170L)
|
| Cutting table(water tank made of stainless
steel.) |
 |
Style |
gantry |
Effective cutting area |
6ft x 13ft; (2000x4000mm) |
Maximum Z-axis travel |
6" (150mm) |
X-Y axis motion system |
rack-pinion/ball screw, and
linear motion guide. |
X-Y axis motion drive |
AC servo motor |
Z axis motion |
AC motor with speed reducer. |
X-Y axis position repeatability |
+/- 0.0009"(0.03mm). |
Maximum work piece weight |
4000kg |
Repeat accuracy |
+/-0.1mm/m |
Best cutting tolerance |
+/- 0.004" (0.10mm) |
Maximum X-Y axis travel speed |
32ft/min (10m/min) |
Cutting head |
|
Pneumatically
operated on/off valve, self-aligned cutting head. Maximum Abrasive flow
rate: 0.5kg/min (1lb/min).
Compressed air source is necessary. An air
compressor is optional item from manufacturer. As an option, the cutting head
can manually tilt in both x and y directions. |
CNC
controller:
Advanced
industrial grade computer. The controller is capable of X-Y axis interpolation
movement. Accelerate or decelerate the motion and high speed travel from point
to point. Simulation without motion or dry run with axis motion but no jetting
of water/abrasive are features included. Error stop and trace repeat are also
very useful features. Out of range warning and hard stop to prevent damage of
the cutting head. Emergency shut off switch is provided. Remote control is
provided to move X-Y-Z axis when operator is away from the controller tower.
Controller Tower Remote
Control
DXF
file compatible:
The
controller is compatible to dxf file format. Users can save design drawing in
.dxf from AutoCAD and read the file into the controller. Controller will post
the dxf file to G-code. The controller can also read G-code generated
from other CAM software. Controller software
interface is based on Microsoft Windows 98/XP/VISTA.
Both metric and British unit versions are available.
Advanced
CAD/CAM software (optional): for design drawing, define machine path and
lead in/out, nesting, tool offset, and generate G code. Features are similar to
AutoCAD, and with rich features of CAM.
Automatic abrasive feeder:
This equipment is highly recommended for large tables |
 |
Requires 70psi
pneumatic source |
| Capacity 40
Gallon. |
| Self detecting
empty/full status of reservoir and start/stop feeding. |
| Model number
ADS-04-170. |
Accessories included in standard package |
Spare parts kit (optional) |
| High pressure tubing |
Including 10 nozzle, 20 orifice, 1 HP seal kit, 1 LP seal kit, 1 HP cylinder, 1 check valve body, 1 check valve repair kit, 1 on/off valve repair kit. |
| Water hose |
| Electrical cable |
| 1 pcs nozzle, 2 pcs orifice, 1 tube of blue goop. |
| 1 set of special tools for pump maintenance. |
|
