Model WC5WA1313U
specification
The
high pressure pump
:
Pump
type
|
dual plunger reciprocal intensifier
|
Intensifier
driven by
|
hydraulic pump
|
Max
pressure
|
55,000psi (380Mpa)
|
Max
water flow rate
|
0.8Gal/min (3.4L/min).
|
Attenuator
|
0.35Gal (1.4 Liters)
|
Cooling
method
|
forced water. Or oil chiller as an option
|
Hydraulic
fluid tank capacity
|
42Gal (170L)
|
Power source
|
3 phase,
380VAC, 50Hz (or 220V 60Hz), 37kw
|
Form size
|
60" x 36"x 55"(1600 x900 x1400mm), weight 1100kg.
|
Protective automatic shut off
under the following circumstances
|
Over pressure limit
|
Over temperature limit
|
Water filter
|
2 stage filtration included inside the
pump unit
|
CNC cutting table
The table consists of water tank, X-Y motion system, Z axis
motion, cutting head assembly, and abrasive mini-hopper with adjustable
abrasive feeding control.
This machine can cut all kinds of metal, marble, granite,
glass, ceramic tile, rubber, plastic, virtually any materials. This machine can
cut metal up to 100mm thick.
| Cutting table(water tank made of stainless
steel.) |
 |
Style |
cantilever |
Effective cutting area |
4ft x 4 ft (1300x1300mm) |
Maximum Z-axis travel |
6" (150mm) |
X-Y axis motion system |
ball screw, linear motion guide |
X-Y axis motion drive |
AC servo motor |
Z axis motion |
AC motor with speed reducer. |
X-Y axis position repeatability |
+/- 0.0016"(0.05mm) |
Best cutting tolerance |
+/- 0.004" (0.10mm) |
Maximum X-Y axis travel speed |
32ft/min (10m/min) |
Cutting head |
|
The assembly consists of
pneumatically operated on/off valve and self-aligned cutting head. Maximum
Abrasive flow rate: 0.5kg/min (1pound/min).
Compressed air source is
necessary. An air compressor is optional item from manufacturer. As an option,
the cutting head can manually tilt in both x and y directions. |
CNC controller
CNC controller consists of
advanced industrial grade computer and specialized software running on the
Microsoft windows platform. The controller is capable of simultaneous X-Y axis
interpolation movement. Fast accelerate or decelerate motion and high speed
travel from point to point. Simulation without motion or dry run with axis
motion but no jetting of water/abrasive are features included. Error stop and
trace repeat are also very useful features. Out of range warning and hard stop
to prevent damage capability are embedded in the system. Emergency shut off
switch is provided. Remote control is provided to control the motion of
X-Y-Z axis when operator is away from the controller tower.
Controller Tower Remote
Contro
lController
screen:
DXF
file compatible:
The
controller is compatible to dxf file format. Users can save design drawing in
.dxf from AutoCAD and read the file into the controller. Controller will post
the dxf file to G-code. The controller can also read G-code generated
from other CAM software. Controller software
interface is based on Microsoft Windows 98/XP/VISTA.
Both metric and British unit versions are available.
Advanced
CAD/CAM software (optional): for design drawing, define machine path and
lead in/out, nesting, tool offset, and generate G code. Features are similar to
AutoCAD, and with rich features of CAM.
Automatic abrasive feeder:
This equipment is highly recommended for large tables |
 |
Requires 70psi
pneumatic source |
| Capacity 40
Gallon. |
| Self detecting
empty/full status of reservoir and start/stop feeding. |
| Model number
ADS-04-170. |
Accessories included in standard package |
Spare parts kit (optional) |
| High pressure tubing |
Including 10 nozzle, 20 orifice, 1 HP seal kit, 1 LP seal kit, 1 HP cylinder, 1 check valve body, 1 check valve repair kit, 1 on/off valve repair kit. |
| Water hose |
| Electrical cable |
| 1 pcs nozzle, 2 pcs orifice, 1 tube of blue goop. |
| 1 set of special tools for pump maintenance. |
